Ideal for special applications on site sites or uncomplicated places.

Nebuliser suitable for surfaces where the precision of dispensing is indispensable.
Suitable for refrigeration or cleaning parts industries.
Consisting of: nebulizer, compressed air dispenser, dispenser and refill.
The nebulizer is equipped with a dispenser protection system and 20 ml recharge. is equipped with a magnet for safe backing.

Installation notes
1) Screw the bottle to the nebulizer. Particular attention. This step must be done without any effort. In case of resistance, unscrew and repeat the operation to avoid damaging the attack.
2) Remove the cap and the peg from the bottle.
3) Insert the dispenser into the vial after removing the peg protection tape applied to the dispenser.

Warning: Keep the falcon vertically while the dispencer is on.

4) Remove the cap of the dispenser tip cap and turn it over, applying a slight pressure on the bottle to facilitate product leakage, keeping it in place until the tip is impregnated. As soon as it drips, the dispencer is ready for use.
5) Insert the dispenser into the nebulizer, holding a pressure for the insertion until it clicks.

Attention: The dispencer must be inserted with the tip as indicated in the video.

Instructions for use and proper maintenance of the tool.

Always keep the nebulizer always with the tip pointing down during work. In the pause between one phase and the other, always place the nebulizer with the tip pointing downwards. At the end of the day, pull out the dispenser and close the tip with the supplied cap. At this stage the dispenser can be rested on the floor without removing the bottle.

Remove the vial only when it is depleted and proceed as in step 4 for a new recharge.

Notes on disposal of containers: dispose of as undifferentiated material.

The tip of the dispencer is a spare part and needs to be replaced when it loses its original shape.